MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 27Account Code Entry/Forced Account Code Entry
Abbreviated Ring 0
See “Ringing Options” on page 593.
Account Code Entry/Forced Account
Code Entry 0
At a Glance 0
Description 0
Use Account Code Entry to enter account codes (developed by accounting or
administrative personnel) for outside calls, both incoming and outgoing. These
codes appear on Station Message Detail Recording (SMDR) reports, along with
other call information, and are used for billing or cost-accounting to identify
outgoing calls with a project, client, or department. You can enter an account code
before or during a call or not at all. You can also change, correct, or cancel an
account code while the call is in progress.
Forced Account Code Entry is similar, but affects only outgoing calls and requires
a caller to enter an account code before placing an outside call. You can change
or correct an account code while a call is in progress, but you cannot cancel it.
To enter, change, or correct an account code during a call, activate the feature
and enter the account code. Only the person who enters the account code hears
the tones generated by dialing the account code number. To cancel an account
code (when permitted), activate the feature and exit without entering a code.
Users Affected Telephone users, operators, data users
Reports Affected Extension Directory, Extension Information, SMDR
Modes All
Telephones All touch-tone telephones
Programming Code
Feature Code
MLX Display Label $FFRXQW&RGH [$FFW]
System Programming Enter extensions required to use account codes before
making an outside call:
●
([WHQVLRQV→$FFRXQW
Hardware Printer for SMDR Reports, or PC and printer equipped with
Lucent Technologies CAS software needed for Account Code
Reports
Maximum 16 characters (0–9, *)
Factory Setting Forced Account Code not assigned to any extensions
To Next Page
Loading...
Need help?
General
