Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 475Pickup
Pickup 30
At a Glance 30
Description 30
Pickup allows users to answer calls that are ringing, parked, or on hold anywhere
in the system. There are two types of Pickup: Individual and Group. Individual
Pickup can be used in three ways: Extension, Line, and General. Table 31
shows
the calls that can be answered with each type of Pickup. Note that if more than
one call is ringing or on hold, the first call received is the one picked up.
Users Affected Telephone users, operators
Reports Affected Extension Information, Group Call Pickup
Modes All
Telephones All (except MLC-5, which cannot be assigned to Pickup
groups)
Programming Codes
Individual Pickup
General use
Specific extension
Specific line
Group Pickup


+ ext. no.
+ line no.

Feature Codes
Individual Pickup
Specific extension
Specific line
Group Pickup
+ ext. no.
+ line no.

MLX Display Labels
Individual Pickup
General use
Specific extension
Specific line
Group Pickup
3LFNXS*HQHUDO>3NXS*HQUO@
3LFNXS([WHQVLRQ>3NXS([W@
3LFNXS/LQH>3NXS/LQH@
3LFNXS*URXS>3NXS*URXS@
System Programming Assign or remove telephones from Pickup groups:
●
([WHQVLRQV→&DOO3LFN8S
Maximums 30 Pickup groups
15 members for each group
1 Pickup group for each telephone

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English