EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

Lucent Technologies MERLIN LEGEND Release 6.1
1021 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 91Basic Rate Interface (BRI)
For the different switches, Multiline Hunt Group has the following capabilities:
â–  5ESS
®
. Multiline Hunt is available for voice-only and digital data-only
applications. Multiline Hunt capability is provided under a switch feature
called
Series Completion
. Do not use the 5ESS feature named
Multiline
Hunt Group
. For alternate voice and digital data applications, special CO
features (such as call forwarding) are also required in the line provisioning.
As a result, this configuration may not be supported by some of the
Regional Bell Operating Companies (RBOCs) or other local carriers.
â–  DMS-100. Multiline Hunt is available for voice-only, digital data-only, and
alternate voice and digital data applications.
â–  EWSD. Multiline Hunt capability is provided under a switch feature called
Series Completion
. However, it is limited to six DSLs in a group, and may
not be supported by some central offices. Do not use the EWSD feature
named
Multiline Hunt Group
. Multiline Hunt is available for voice-only and
digital data-only applications. Alternate voice and digital data applications
are not supported.
NOTE:
Multiline Hunt is not part of IOC package S. If Multiline Hunt is
needed, you must order the appropriate feature and inform the
central office of the switch settings that you need (see Appendix H of
System Planning
).
Called Party Number 3
In general, the term
Called Party Number
(CdPN) denotes a telephone number
that has been dialed to reach a destination. However, while routing the call, the
network can change the Called Party Number to make routing easier. In either
case, the network sends the Called Party Number to the system when a call
arrives at the system. The called party number is usually displayed on the second
page of the MLX display.
Calling Party Number 3
The Calling Party Number (CPN) provides incoming calling party number
information that identifies the originator of a call in the call-handling displays of
MLX telephones. If the owner of the MERLIN LEGEND Communications System
subscribes to this BRI feature, each incoming call to the system over a BRI line
can be accompanied by the CPN or by the billing number of the calling party
supplied by the network.
NOTE:
If the calling party subscribes to the central office Directory Number Privacy
feature, no number is received.

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals