Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 102Call Waiting
Primary Rate Interface
and T1
Call Waiting is provided on PRI lines at extensions so programmed. The
call-waiting tone at an extension is not blocked by PRI lines. Until the call
is answered, answer supervision is not returned to the network and the
caller hears regular ringback instead of call-waiting ringback.
Call Waiting does not work with data calls.
Recall/Timed Flash If Recall is used while a user is hearing special ringback, the call is
disconnected and the user hears inside dial tone.
Reminder Service Reminder calls are not eligible for Call Waiting.
Service Observing In Release 6.1 and later systems the Call Waiting tone is heard only at the
extension that is receiving the call. For example, the Call Waiting tone is
not heard by the observed extension if the waiting tone sounds at the
Service Observer extension, and vice versa.
If a Service Observer picks up a Call Waiting call while observing, he or
she is dropped from Service Observing.
SMDR In Release 4.2 and later systems with the Talk Time option enabled,
timing for calls to Auto Login and Auto Logout calling groups starts as
soon as the system detects the calls. In Release 4.1 and prior systems,
SMDR does not begin measuring the duration of a call-waiting call until
the call is answered.
System Access/
Intercom Buttons
An extension is considered busy when all SA or ICOM buttons (excluding
SA Originate Only or ICOM Originate Only) are in use. A multiline
telephone user can dial the Call Waiting feature code to pick up a waiting
call only when an SA Originate Only or ICOM Originate Only button is
available.
Transfer A user with no buttons available to receive a transferred call hears the
call-waiting tone when a co-worker uses the Transfer feature to transfer a
call, even if Call Waiting is not activated.
A call received by using call-waiting pickup can be transferred only if an
SA or ICOM button on which to transfer the call becomes available.
UDP Features For Release 6.0 and later systems (Hybrid/PBX mode only), a private
network call receives the same treatment as an outside call. The person
receiving the call hears the call-waiting tone and the caller hears
ringback.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English