MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Prior Releases: Features and Enhancements
Page xliiiRelease 3.1 Enhancements (March 1996)
Disallowed List Including Numbers Often
Associated with Toll Fraud 0
A factory-set Disallowed List 7 contains default entries, which are numbers
frequently associated with toll fraud. By default, Disallowed List 7 is automatically
assigned to both generic and integrated VMI (voice messaging interface) ports
used by voice messaging systems. The system manager can manually assign this
list to other extensions.
Default Pool Dial-Out Code
Restriction for All Extensions 0
The default setting for the pool dial-out code restriction (Hybrid/PBX mode only) is
restricted. No extension or remote access user with a barrier code has access to
pools until the restriction is removed by the system manager.
Default Outward Restrictions for VMI Ports 0
Ports assigned for use by voice messaging systems (generic or integrated VMI
ports) are now assigned outward restrictions by default. If a voice messaging
system must be allowed to call out (for example, to send calls to a user’s home
office), the system manager must remove these restrictions.
SECURITYlALERT:
!
Before removing restrictions, it is strongly recommended that you read
Appendix A, “Customer Support Information.”
Default Facility Restriction
Level (FRL) for VMI Ports 0
The default Automatic Route Selection (ARS) FRL for VMI ports is 0, restricting all
outcalling.
Default for the Default Local Table 0
The default Automatic Route Selection (ARS, Hybrid/PBX mode only) FRL has
changed to 2 for the Default Local table. System managers can easily change an
extension default of 3 to 2 or lower in order to restrict calling. No adjustment to the
route FRL is required.
New Maintenance Procedure for
Testing Outgoing Trunks 0
Technicians must enter a password in order to perform trunk tests.
To Next Page
Loading...
Need help?
General
