Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 379Integrated Administration
System Programming Results 26
When you press

(6DYH), the following information is saved and sent to the
system. This information replaces existing system programming of the applicable
items.
■ Reliable Disconnect setting
■ Delay Ring value
■ Coverage Delay Ring value
■ VMS Transfer Return Interval setting
■ Transfer Return Time setting
Screen Results 26
After changing the values on the Application Switch Defaults screen, press

(
6DYH); the Technician Maintenance menu returns.
Extension Directory Setup 26
When the technician selects ([WHQVLRQ'LUHFWRU\6HWXS from the Technician
Maintenance menu during installation, IS III checks whether the system Extension
Directory already exists in the application database. If the directory does not exist,
IS III reads the switch extensions into the database, together with the label for
each extension, if there is one. If the directory does exist, the technician can make
one of the following choices:
■ Exit without making any changes to the database, using

(&DQFHO).
■ Reinstall the database. This choice completely replaces the existing
Extension Directory in the application database.
■ Reconcile the database with the switch. This choice follows the same rules
as the daily reconciliation program, described earlier in Table 25, page
371.
System Programming Results 26
No information is sent to the switch.
Screen Results 26
The user is returned to the Technician Maintenance menu.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English