Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 383Integrated Administration
No two subscribers can be assigned the same private fax extension.
However, a group of individuals can use the same private fax extension, as
follows:
— An extension number that is not a valid extension on the system is
assigned as a special-purpose extension, as described earlier under the
Extension Directory screen. This extension is the
group fax
administrator
.
— The special-purpose extension is assigned a private fax extension on
the AUDIX Voice Power/Fax Attendant User screen.
— Group members are assigned as Fax Attendant subscribers on the
Extension Directory screen, but are
not assigned private fax extensions.
When callers reach the group fax administrator’s private fax extension,
they are prompted for the voice extension of the group member to receive
the fax. (See the Fax Attendant
System Manager’s Guide for instructions
about programming voice prompts.)
System Programming Results 26
The following instructions are sent to the system:
■ Add extension(s) to or delete from AUDIX Voice Power coverage group
(30), depending on selection in Add User to AUDIX Voice Power Cover
Group field.
■ Add Auto Dial button for Automated Attendant calling group (770).
■ Add private fax extension(s) to, or delete from, AUDIX Voice Power
coverage group.
Screen Results 26
When finished using the AUDIX Voice Power User or AUDIX Voice Power/Fax
Attendant User screen, press

(
6DYH). The Subscriber screen appears for
AUDIX Voice Power or AUDIX Voice Power/Fax Attendant. Subscriber screens
are used for programming application parameters and do not send any
information to the switch.
Access the Subscriber screens by selecting
6XEVFULEHU$GPLQLVWUDWLRQ from
the AUDIX Voice Power or AUDIX Voice Power/Fax Attendant menu under the
Integrated Solution III or Integrated Solution Maintenance menu. This method
allows information about an existing subscriber to be changed but does not allow
the addition of a new subscriber.
System Programming/Switch Admin 26
On initial installation of IS III , selecting 6\VWHP3URJUDPPLQJ6ZLWFK$G PLQ from
the AUDIX Voice Power or AUDIX Voice Power/Fax Attendant menu brings up the
System Programming/Switch Admin Form screen. Figure 26 on page 384
shows
this screen, and a description of its use follows.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English