MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 408Language Choice
Considerations and Constraints 27
After a System Reset (cold start), the system language reverts to the default
setting, English.
In a system release prior to Release 1.1, if a user attempts to set the language on
a telephone, he or she hears a reorder tone or an error beep.
When the system and extension language selections are different, the extension
language takes precedence.
Telephone Differences 27
Multiline Telephones 27
Language choice is supported only on MLX telephones.
Because the extension language takes precedence over the system language,
Alarm Clock (display telephones only) and Reminder differ, depending on the
language used at an extension. When the extension language is set for English or
the system language has been set for English and no extension language
selection has been programmed, MLX telephone users set the Alarm Clock and
Reminder features using 12-hour time (a.m. or p.m.). When the extension
language is French or Spanish, or the system language is set for French or
Spanish and no extension language has been chosen, the MLX telephone user
sets the Alarm Clock and Reminder features using 24-hour time. Language
choice affects only the Reminder feature on MLX-10 and MLX-5 nondisplay
telephones.
Feature Interactions 27
Alarm Clock and
Reminder Service
Enter the time settings for Alarm Clock and Reminder according to the
language selection governing the extension. If the language selection is
English, the time setting for Alarm Clock and Reminder must be entered
in 12-hour format (0100–1259) followed by either a

$ for a.m. or a 
3
for p.m. If the governing language selection is French or Spanish, the time
setting must be entered in 24-hour format (0000–2359).
To Next Page
Loading...
Need help?
General
