MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 460Paging
Pools In Hybrid/PBX mode, line/trunk jacks used for loudspeaker paging cannot
be assigned to pools.
Primary Rate Interface
and T1
If the extension for an incoming PRI call matches a group paging
extension, the call is treated as an unassigned Direct Inward Dial call.
Data lines cannot be used for paging.
Remote Access Loudspeaker Paging cannot be accessed from outside the system
through either DID lines or remote access.
Service Observing In Release 6.1 and later systems, a Group Page call cannot be observed.
A Loudspeaker Page call cannot be observed.
SMDR Paging calls are not printed on the SMDR report.
System Access/
Intercom Buttons
Announcements using Speakerphone Paging can be made from a
Shared SA button. However, users cannot join a page on a Shared SA
button.
System
Renumbering
Extensions for paging groups can be renumbered. The factory-set
extensions are 793 through 799; Page All is 799.
Transfer Calls cannot be transferred either to paging groups or the loudspeaker
paging extension.
UDP Features In Release 6.0 and later systems (Hybrid/PBX mode only), loudspeaker
and voice paging calls cannot be made to non-local dial plan extensions
or paging groups.
Voice Announce
to Busy
Users who program their extensions to turn off Voice Announce to Busy
(Voice Announce on MLX telephones) do not receive individual or group
speakerphone pages.
To Next Page
Loading...
Need help?
General
