EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

Lucent Technologies MERLIN LEGEND Release 6.1
1021 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #522 background imageLoading...
Page #522 background image
MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 473Personal Lines
Primary Rate Interface
and T1
A personal line can be assigned to an extension to represent a PRI line
with routing by dial plan. The green LED associated with the personal line
lights steadily, and ringing on an SA button occurs; the LED does not
flash to indicate that a line/trunk is ringing.
A personal line can be assigned on a telephone for monitoring the status
of a data line; however, users
must not
use the personal line to attempt to
complete a call.
Privacy When an individual personal line is assigned to more than one extension,
a user with the personal line cannot join an in-progress call on which
Privacy has been activated.
Recall/Timed Flash When two users have joined an outside call on a shared personal line
(loop-start only), Recall can be used by either inside party.
Service Observing In Release 6.1 and later systems, calls made or received on Personal
Lines can be observed. A Service Observer cannot use a Personal Line
to observe a call.
Bridging takes priority over Service Observing; an observer is dropped
before a bridge is denied. If a call on a Personal Line is being observed
and a third internal extension is bridged onto the call, the Service
Observer is dropped from the call.
System Access/
Intercom Buttons
When a call on a personal line button is transferred to another user, the
call rings on an SA or ICOM button. The LED next to the personal line
flashes rapidly to indicate that the call is on hold for transfer. If the call is
answered at an SA or ICOM button, the LED next to the personal line
turns on steadily. If a user shares the personal line appearance and
answers the call by using the personal line button, the call is removed
from the SA or ICOM button.
Tandem Switching In Release 6.0 and later systems (Hybrid/PBX mode only), to avoid toll
fraud, private-networked trunks should not be assigned to any extensions
as personal lines.
Transfer If a call is received on a personal line and is transferred to another user
who receives the call on an SA or ICOM button and then puts the call on
hold, another user who shares the personal line cannot select the shared
personal line button and pick up the call. If for some reason the person
who received the transfer and put the call on hold cannot return to the
call, another user must use Pickup to pick up the call. For example, an
operator can take a message and then disconnect the caller.
UDP Features To avoid toll fraud for Release 6.0 or later systems (Hybrid/PBX mode
only), private network trunks must not be assigned to extensions as
personal lines.
In Release 6.1 and later systems, the principal user of a personal line can
forward calls to a non-local extension.

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals