Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 491Primary Rate Interface (PRI) and T1
At a Glance - Continued
Maximums
PRI-specific
continued
Digits for each telephone
number sent to network
for outgoing calls
Digits for test trunk
telephone number
PRI Dial-Plan Routing
Table (Hybrid/PBX)
Number of entries
Digits for each pattern
Digits to delete
Digits to add
Network Selection Table
Number of entries
Digits for each pattern
Special Services
Selection Table
Number of entries
Digits for each pattern
Digits to delete
Call-by-Call Services
Table
Number of entries
Number of patterns for
each entry
Digits for each pattern
Digits to delete
T1-specific
T1 Dial-Plan Routing
Table
Number of entries
Expected Digits
Digits to delete
Digits to add
12
12
16 (0–15)
8
14 (range 0–14, 0 = wildcard)
4
4 (0–3)
8 (* = wild card; at least one * required; all *s must be at end
and contiguous.)
8 (0–7)
4
4 (range 0–4)
10 (0–9)
10
8
8 (range 0–8)
24 (1–24)
3 (range 1–3)
4 (range 0–4)
4 (range 0–4)
Factory Settings
Systemwide
Primary Clock
Clock Synchronization
Source
Clock
100D Module
Type of Facility
Framing Format
Line Coding
Signaling
First port that is in service on an 800 NI-BRI module or first
100D module in service in control unit
Loop (not definable by system manager)
Active
T1
D4 compatible
AMI-ZCS
Robbed-Bit Signaling (RBS)

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English