Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 588Remote Access
Remote access calls ring on SA or ICOM buttons; however, the telephone rings
like an outside call.
Systems with DID trunks can designate a DID extension that offsite users can dial
to use remote access.
If a remote caller does not dial a number or feature code before the time-out
period expires, the call goes to the redirect destination programmed for remote
access.
Lines/trunks used for dedicated remote access must not be assigned to ring into a
calling group.
Systems that use Call Accounting System (CAS) track calls by barrier codes.
Touch-tone receivers are needed for remote access to work. For more information
about TTR requirements see “Touch-Tone or Rotary Signaling” on page 687
.
In Release 6.0 and later systems, a remote-access caller who calls into his or her
own local system can reach extensions networked to the local system (non-local
dial plan extensions), just as onsite users of the local system can.
Mode Differences 40
Hybrid/PBX Mode 40
Remote access Automatic Callback is available only in Hybrid/PBX mode for calls
made to busy pools.
In Release 6.0 and later systems, networked trunks for use by non-local dial plan
extensions connected to another MERLIN LEGEND Communications System or
to a DEFINITY ECS or DEFINITY ProLogix Solutions systems are available only
in Hybrid/PBX mode.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English