MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 604Saved Number Dial
HotLine Saved Number Dial is not available at HotLine extensions (Release 5.0
and later systems).
Inspect In Release 2.0 and later systems, when a user presses Inspct and then a
programmed Saved Number Dial button, the saved number appears on
the display.
In Release 1.0 and 1.1 systems, when a user presses Inspct and then a
programmed Saved Number Dial button,

6DYHG1XPEHU'LDO appears on
the display.
Microphone Disable When an MLX telephone’s microphone is disabled, pressing a Saved
Number Dial button before lifting the handset turns on the speakerphone
so that you can hear the number being dialed. However, once the call is
answered, you must lift the handset to talk.
Recall/Timed Flash Recall can be used on a call made using Saved Number Dial on a
personal line or Pool button (loop-start only), an inside call, or, in Release
2.0 and later systems, an outside call made on a loop-start line using an
SA or ICOM button.
Service Observing In Release 6.1 and later systems, Saved Number Dial calls can be
observed.
SMDR All outside numbers dialed with Saved Number Dial are recorded by
SMDR.
Speed Dial Telephone numbers dialed using Personal Speed Dial are stored by
Saved Number Dial. If the number includes special characters, such as
Pause or Stop, the special characters do not work when the number is
redialed using Saved Number Dial. Telephone numbers dialed using
System Speed Dial are not stored by Saved Number Dial.
System Access/
Intercom Buttons
When Saved Number Dial is used on a call made with a Shared SA
button, the number is stored on the telephone where Saved Number Dial
was used, not on the principal extension.
Transfer The Saved Number Dial feature can be used to dial the outside number of
a party to which a call is being transferred.
To Next Page
Loading...
Need help?
General
