MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 629Speed Dial
Authorization Code Users cannot enter authorization codes by using a System Speed Dial or
Personal Speed Dial code because these features are activated by
dialing
. Pressing completes the entry of an authorization code and
cannot also be used to activate speed dial features.
Automatic Route
Selection
Personal Speed Dial and System Speed Dial numbers can include the
ARS code.
Callback When a Stop character is programmed as part of a Speed Dial number,
stay on the line, wait for the callback call, and then reactivate Speed Dial.
This signals the system to continue dialing the digits following the Stop
character.
Calling Restrictions When a marked System Speed Dial code is used to dial a number, any
calling restrictions (such as toll or outward restrictions) assigned to the
extension are overridden.
Conference Press the Conf button to enter the Flash special character in a Personal
Speed Dial or System Speed Dial telephone number.
Digital Data Calls Personal and System Speed Dial codes can be used on digital
communications equipment (DCE).
Speed Dial codes can be used only on digital video systems that have the
ability to dial feature codes or number strings beginning with
.
Directories System Speed Dial numbers are stored in the System Directory. MLX
display telephone users can dial the numbers by selecting the name from
the display. If the number is on a marked System Directory listing, select
the listing and dial the number regardless of any calling restrictions (toll
and outward) assigned to the extension.
Drop Press the Drop button to enter the Stop special character in a Personal
Speed Dial or System Speed Dial telephone number.
Hold Press the Hold button to enter the Pause special character in Personal
Speed Dial or System Speed Dial telephone numbers.
HotLine A HotLine extension (Release 5.0 and later systems) can dial only the first
Personal Speed Dial number (code 01) programmed for the extension.
The end-of-dialing digit, #, should be programmed at the end of the speed
dial number. See Appendix H, “Programming Special Characters,” for
additional information.
Labeling The telephone numbers associated with System Speed Dial codes are
entered by using the programming screens to program labels for System
Directory listings.
Last Number Dial Telephone numbers that are dialed by using Personal Speed Dial are
stored by Last Number Dial. However, if the stored number includes a
special character, such as Pause or Stop, the special character does not
work when the number is redialed by using Last Number Dial. Telephone
numbers that are dialed by using a System Speed Dial code are not
stored by Last Number Dial.
To Next Page
Loading...
Need help?
General
