MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 635Station Message Detail Recording (SMDR)
â– , indicates either an incoming voice call with ANI or Caller ID information,
or a data call on a PRI or other facility equipped to receive the caller’s
number.
In ISDN format, Release 4.0 and later systems, the values in this column have the
following meanings:
â– & indicates either an outgoing voice call or an incoming voice call without
ANI or Caller ID information.
â– ' indicates an outgoing data call on a PRI, BRI, or T1 facility.
â– , indicates an incoming voice or data call with ANI or Caller ID information
on a PRI, BRI, or other facility equipped to receive the caller’s number.
DATE (Column 2) 42
The date is shown in
mm/dd/yy
format with leading zeros.
In Release 4.1 and prior systems, the reported date is as follows:
â– When an incoming call was answered
â– When an outgoing call was originated (The system detected end of
dialing.)
In Release 4.2 and later systems, the reported date is as follows:
â– For Auto Login or Auto Logout calling groups with Talk time enabled, when
an incoming call was detected in the system
â– When any other incoming call was answered, regardless of the Talk Time
option status
â– When an outgoing call was originated (The system detected end of
dialing.)
TIME (Column 3) 42
The time is shown in
hh:mm
24-hour (military) format.
In Release 4.1 and prior systems, the reported time is as follows:
â– When an incoming call was answered
â– When an outgoing call was originated (The system detected end of
dialing.)
In Release 4.2 and later systems, the reported time is as follows:
â– For Auto Login or Auto Logout calling groups with Talk time enabled, when
an incoming call was detected in the system
â– When any other incoming call was answered, regardless of the Talk time
status
To Next Page
Loading...
Need help?
General
