Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 639Station Message Detail Recording (SMDR)
LINE (Column 7) 42
The incoming or outgoing line/trunk used for the call.
STN. (Column 8) 42
For outgoing calls, Column 8 displays the extension number where the call was
placed.
In Release 4.2 and later systems, Column 8 displays extension numbers for
incoming calls as follows:
■ If the Talk Time option is disabled, the extension number that first
answered, overridden only when the call is transferred to another extension
or parked and picked up by another extension
■ If the Talk Time option is enabled, the extension number of an Auto Login
or Auto Logout calling group member who answered
■ If the Talk Time option is enabled and the calling party disconnected before
a member of an Auto Login or Auto Logout calling group answered, either
the extension number of the last delay announcement device that handled
the call or the calling group member extension number where the call was
alerting when the caller hung up. If the call was transferred to the calling
group and not handled by a group member or delay announcement device,
Column 8 includes the extension number of the transfer originator.
■ If blank, the caller disconnected while the call waited in the calling group
queue for answering by an announcement device or an agent.
In Release 4.1 and prior systems, Column 8 displays the number of the extension
where an incoming call was answered, overridden only when the call is
transferred to another extension or parked and picked up by another extension.
ACCOUNT (Column 9) 42
In Release 1.0 and later systems, Column 9 displays the following values:
■ The account code, if entered, for an incoming or outgoing call attributed to
a specific project, department, or employee for billing purposes
■ If the incoming call was a successful remote access call, either the 2-digit
barrier code ID number (01–16) preceded by six consecutive
s, or
, indicating that no barrier code was required, overridden only
when an account code was subsequently entered
■ If the remote access caller failed to enter the correct barrier code, 16 zeros
or .
In Release 3.0 and later systems, Column 9 also can display either the
authorization code (if entered with the option enabled) or the extension that
placed the outgoing call for a call that exceeded the minimum call length. For a
PRI call, the restriction code for the FTS 2000 network (U.S. Federal Government
only) is recorded in this field.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English