Lucent Technologies MERLIN LEGEND Release 6.1 - Page 834

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Sample Reports
Page F-3
F
Table 55. System Reports
Menu Option Report Name Description
$OO
Prints each of the reports available on the Print
menu, from
6\V6HWXS to (UURU/RJ.
Note: With
$OO selected, four trunk information
reports automatically print. See
7UXQN,QIR.
6\V6HWXS
System Information Systemwide information such as return
intervals, system mode, system programming
port, slot assignments, and so on.
'LDO3ODQ
Dial Plan Extensions assigned to pools, paging zones,
calling groups, lines or trunks, and stations (in
the report); labels for lines/trunks and stations.
/DEHOV
Label Information Labels assigned to stations (extensions),
Posted Messages, and names and telephone
numbers in MLX-20L Personal Directory.
7UXQN,QIR
Select to display four trunk options: 7LH, ',',
/RRS*URXQG, *HQHUDO.
7,(
TIE Trunk Information Extensions assigned to and signaling
attributes associated with Tie trunks.
','
DID Trunk Information Extensions assigned to and signaling
attributes associated with DID trunks.
/RRS
*URXQG
GS/LS Trunk Information Extensions assigned to, signaling attributes for
ground- and loop-start lines/trunks.
*HQHUDO
General Trunk Information All identified extensions and feature-related
attributes of each extension.
7,QIR
DS1 information Options (line, signal, and so on) assigned to
T1 trunks or lines.
35,,QIR
PRI Information PRI trunks assigned to B-channel groups.
5PRWH$FFHVV
Remote Access (DISA)
Information
Remote access dial code, class of restriction,
barrier code information.
2SHU,QIR
Operator Information For each system operator position: logical ID,
extension number, label, type (DLC or QCC).
All general system operator options, such as
backup position; call types and priorities.
$OORZ/LVW
Allowed Lists Telephone numbers included in Allowed Lists.
Lists numbered 0–7; entries numbered 0–9.
$OORZ/LVW7R
Access to Allowed Lists Lists numbered 0–7. If the Allowed List is
assigned to remote access users and barrier
codes are used, barrier codes are numbered
0–16. If no barrier codes are used, 17 means
list is assigned to tie-trunk users and 18
means tlist is assigned to non-tie-trunk users.
Continued on next page