MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Applications
Page I-78Ascend Pipeline 25Px/75Px
I
System Programming 67
In order to use the 2B Data feature, the Pipeline 25Px/75Px’s MLX port must be
programmed for the feature. An extension jack programmed as a QCC position
(Hybrid/PBX mode only) cannot be programmed for 2B data and used by the
access device. Extensions for MFMs (or data communications equipment not
supporting 2B data, such as ISDN terminal adapters) cannot be programmed for
data and should not be connected to 2B data ports.
For programming details, see
System Programming.
Night Service If a digital communications device is a member of the Night Service
group, voice calls to Night Service group do not ring at these extensions.
Data or video calls
do
ring, and 2B data calls can be established.
However, if there are two or more 2B data extensions in the system
assigned to Night Service groups, 2B data calls can be answered at the
wrong extension during Night Service.
Paging Digital communications devices can be assigned to a paging group.
However, they should not be: they are not alerted if there is a call to a
paging group, and they cannot make group pages.
Park Data calls cannot be parked.
Personal Lines Personal lines can be assigned to digital communications devices. It is
best for these extensions to have exclusive use of their own personal
lines; if they do not, the system manager should ensure that enough idle
lines are available, particularly for 2B data calls.
Pickup A digital communications device can pick up a data call.
Pools If a digital communications device is programmed to have a single Pool
button, two calls to that pool result in a 1B data call. However, if two
separate pools are assigned to the data extension, then a 2B data call
can be established. If there is more than one video system sharing the
pools, 2B data calls can be misrouted.
Privacy Privacy is activated automatically for digital data calls.
Reminder Service Digital communications devices cannot receive reminder calls.
Remote Access Data calls cannot be made into lines programmed for remote access.
Ringing Options Personalized Ringing and Ringing Options have no effect on calls to
digital communications devices. Calls ring immediately.
Speed Dial Personal and System Speed dial codes can be used on digital
communication equipment (DCE).
Transfer Data calls cannot be transferred.
Voice Announce to
Busy
Voice Announce to Busy should be disabled at digital data workstations.
To Next Page
Loading...
