MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 47Authorization Code
Feature Interactions 0
Account Code Entry If an account code is not entered, the ACCOUNT field of the SMDR
printout contains the authorization code or the home extension used to
obtain restriction privileges. If an account code is entered at any time
during a call, the account code is stored in the SMDR record.
If the extension used to make a call is assigned Forced Account Code
Entry, the caller is not forced to enter the account code while using the
Authorization Code feature.
If the home extension is assigned Forced Account Code Entry, the caller
must enter an account code before entering an authorization code.
Automatic Route
Selection
An authorization code must be entered before dialing the ARS access
code.
Conference Enter an authorization code before each outside call for a conference.
You may enter different authorization codes for different outside calls,
which is useful if different privileges are needed for different outside calls.
Digital Data Calls Data calls can use authorization calls. If Account Code Entry is also used,
the authorization code must be entered after the account code.
Authorization codes can be used by video systems that allow the use of #
for feature codes.
Headset Options Pressing the Headset Hang Up button deactivates the Authorization Code
feature.
Forward and
Follow Me
In Release 6.0 and later Key or Hybrid/PBX mode systems, forwarding
features, including Centrex Transfer via Remote Call Forwarding but
excluding Follow Me, can be activated or deactivated at an extension on
the system by entering the authorization code for the extension on the
same system from which calls are to be forwarded. The user enters the
authorization code, then activates or deactivates the feature in the normal
fashion. This is especially useful for a single-line telephone user who
must include a Pause character in a Remote Call Forwarding dialing
sequence, because the character cannot be dialed at a single-line
telephone. It is also useful when forwarding options must be changed for
a phantom extension.
Hold Initiating hold after entering an authorization code deactivates the
Authorization Code feature for subsequent calls.
Last Number Dial For security reasons, an authorization code is not saved by the Last
Number Dial feature.
Authorization Code does not affect Last Number Dial on the extension
you are using or on your home extension. You can retrieve the last
number dialed on the phone you are using.
Night Service An authorization code can be used when Night Service is activated.
Park Initiating Park after entering an authorization code deactivates the
Authorization Code feature. An authorization code does not need to be
entered to pick up a parked call.
To Next Page
Loading...
Need help?
General
