Section 4 –
850 kg SEARCHER HOOK MOMENT LIMITER DISPLAY
Mini-Crawler Crane M A E D A
4-142 1/2019 MC405C-3
Wire Falls Selector Switch and Wire
Falls Display LED (Blue)
DANGER! Fall mode/option mode and
searcher hook must be set as "850 kg
searcher hook mode".
Using 850 kg searcher hook other than in
850 kg searcher hook mode may prevent
activation of the pre-warnings and boom
auto-stop even when the approaching
overload , and thus may result in crane
damage or machine tipping and could cause
a serious accident.
Use the wire falls selector switch to change the
number of wire falls options.
Keep pressing the switch for 2 seconds or more.
Operation mode of wire falls will change as
shown below by pressing the switch for 2
seconds or more each time.
Fig. 4-406
Fig. 4-407
NOTICE: When changing the setting, right after
doing so, release your hand from the switch, and
then press the switch again.
Cancel Switch
DANGER! Do not use 850 kg searcher hook if
actual searcher hook offset position and
display of boom length windows do not
match. Without setting moment limiter to the
actual searcher hook offset position, moment
limiter may not work properly and thus may
result in crane damage or machine tipping
and could cause a serious accident.
Use the cancel switch and fall mode/option
selector switch to set searcher hook offset
position shown in the boom length window.
• With fall mode set as 850 kg searcher hook
mode, press fall mode/option selector switch
(24) and cancel switch (23) at the same time for
2 seconds or more and shift to set actual
searcher hook offset position.
For correct setting, see "Searcher Hook offset
position and mode display in boom length
window" on page 4-143.
Pressing fall mode/option selector switch (24)
and cancel switch (23) at the same time for 2
seconds or more shifts boom length display in
order of "SH1 SH2 SH3 SH1 ・・・"
Fig. 4-408
NOTICE: When changing the setting, right after
doing so, release your hand from the switch, and
then press the switch again.
When in 850 kg searcher hook mode, searcher
hook position mode display and actual boom
length value are shown alternately.