Maeda MC405C-3 - An Example for Setting in the a Mode

Mini-Crawler Crane M A E D A Section 4 – MODE SETTING OF THE TRANSMITTER
1/2019 MC405C-3 4-103
Version Information
Push the Hook stow/Setting button, so that
version information of the Transmitter firmware is
displayed. Another push of the same button
makes the display returns to the A MODE
screen.
Fig. 4-269
Exit
CAUTION: Once setting-up the desired
function items of all is completed, do not
forget to practice the termination procedure,
below. Otherwise, when this process is not
correctly terminated, the latest setting will not
become valid.
Fig. 4-270
1. Once setting-up the desired function items of
all is completed, ensure that the display has
returned to the A MODE screen.
2. Shift the cursor ( or ) using the Hook
raising and lowering lever and select "EXIT".
3. Push the Hook stow/Setting button, which
will terminate the "A MODE" and turn the
mode to the "CRANE MODE".
An Example for Setting in the A Mode
Hereunder is a procedure to change the time of
the "OFF timer", from "5 minutes" of the factory
setting, to 10 minutes:
1. Use the Hook raising and lowering lever and
shift the cursor ( or ) to the side of the
function item to change.
2. When the cursor comes to the side of the
"OFF timer", push the Hook stow/Setting
button.
Now, the "OFF timer" is selected and the
cursor ( ) appears next to "5 minutes", as
the current value.
3. Use the Hook raising and lowering lever so
that the cursor ( ) comes to the side of "10
minutes", then push the Hook stow/Setting
button.
Now, the "OFF timer" setting is 10 minutes.
Fig. 4-271
A MODE SETTING LCD SCREEN