Maeda MC405C-3 - Operation Seat; Reclining Adjustment; Seat Forward;Backward Slide Adjustment

Mini-Crawler Crane M A E D A Section 4 – OPERATION SEAT
1/2019 MC405C-3 4-13
OPERATION SEAT
Fig. 4-30
1 - Back seat
2 - Seat
3 - Slide adjusting lever
4 - Reclining adjusting lever
WARNING!
• Adjust the operation seat before operation.
Be sure to make adjustment especially after
someone else has used it.
• Press your back against the back seat of the
operation seat and adjust the operation seat
so that you can operate the acceleration
pedal, control levers and travelling lever
without any difficulty.
• Never adjust the operation seat while
operating the machine.
Seat Forward/Backward Slide
Adjustment
Use the slide adjusting lever (3) to make
adjustment.
Fig. 4-31
1. While pushing the slide adjusting lever (3)
leftward, move the seat (2)
forward/backward.
2. After adjusting the seat (2), release your
hand from the slide adjusting lever (3).
The seat (2) is fixed to the position.
NOTICE: The forward/backward slide adjustment
distance is 120 mm in 6 steps.
Reclining Adjustment
Use the reclining adjusting lever (4) to make
adjustment.
Fig. 4-32
1. While pushing the reclining adjusting lever
(4) forward, move the backseat (1)
forward/backward.
2. After adjusting the back seat (1), release
your hand from the reclining adjusting lever
(4).
The back seat (1) is fixed to the position.
NOTICE: The reclining adjustment angle is 75
degrees in 7 steps forward and 23 steps in
backward.