Maeda MC405C-3 - INSPECTION; Pre-Start and Post-Start Inspection Items

Mini-Crawler Crane M A E D A Section 5 – INSPECTION
1/2019 MC405C-3 5-21
INSPECTION
Pre-Start and Post-Start Inspection Items
Inspection Item
Reference
Pre-Start Visible Checks
Check Crane
See "Crane" on page 5-23.
Check Wire Ropes See "Wire Ropes" on page 5-23.
Check Hook Block See "Hook Block" on page 5-23.
Check Outriggers
See "Outriggers" on page 5-23.
Check Track and Frame See "Tracks and Frame" on page 5-24.
Check Travelling Dolly See "Travelling Dolly" on page 5-24.
Check Engine See "Engine" on page 5-24.
Check Travel and Crane Controls See "Travel and Crane Controls" on page 5-24.
Pre-Start - Before Starting Engine
Check / Add Engine Coolant Level See "Check / Add Engine Coolant" on page 5-24.
Check / Add Engine Oil See "Check / Add Engine Oil" on page 5-25.
Check / Add Fuel See "Check / Add Fuel" on page 5-26.
Check / Clean Water Separator See "Check / Clean Water Separator" on page 5-26.
Check / Add Hydraulic Oil See "Check / Add Hydraulic Oil" on page 5-27.
Check / Add Slewing Motor Reduction Gear Case Oil See "Check / Add Slewing Motor Reduction Gear Case Oil" on page 5-28.
Check / Add Travel Motor Reduction Gear Case Oil See "Check / Add Travelling Motor Reduction Gear Case Oil" on page 5-28.
Check Dust Indicator See "Check Dust Indicator" on page 5-29.
Check Battery Charge Level See "Check Battery Charge Level" on page 5-29.
Check Horn Operation See "Check Horn" on page 5-30.
Check Working Light Operation See "Check Working Light Operation" on page 5-30.
Check Fuse Box See "Check Fuse Box" on page 5-30.
Check Outrigger Display Operation
See "Check Outrigger Display" on page 5-30.
Adjust Operation Seat
See "Adjust Operation Seat" on page 5-31.
Post-Start - After Starting Engine
Check / Adjust Rubber Track Tension
See "Check / Adjust Rubber Track Tension" on page 5-31.
Check Rubber Tracks for Damage and Wear
See "Check Rubber Tracks for Damage and Wear" on page 5-33.
Check Outrigger Safety Device Operation
See "Check Outrigger Safety Device Operation" on page 5-33.
Check Outrigger Operation
See "Check Outrigger Operation" on page 5-35.
Check Crane Operation
See "Check Crane Operation" on page 5-35.
Check Over Winding Detector Operation See "Check Over Winding Detector Operation" on page 5-37.
Check Moment Limiter Operation
See "Check Moment Limiter Operation" on page 5-37.
Check Outrigger Extension Positions
See "Check Outrigger Extension Positions" on page 5-38.
Check Engine Exhaust Gas Colour, Noise and Vibration
See "Check Engine Exhaust Gas Colour, Noise and Vibration" on page 5-
38.
As Required
Replace Rubber Tracks See "Removal of Rubber Tracks" on page 5-64.
Replace Winch Wire Rope See "Wire Rope" on page 5-65.
Check / Adjust Boom Telescoping Wire Rope See "Check / Adjust Boom Telescoping Wire Rope" on page 5-70.
Inspect / Clean / Replace Air Cleaner See "Inspection, Cleaning and Replacement of Air Cleaner" on page 5-72.
Clean Inside Engine Cooling System See "Cleaning Inside Engine Cooling System" on page 5-74.
Drain Contaminant Water/Deposits in Fuel Tank See "Draining Contaminant Water/Deposits in Fuel Tank" on page 5-76.
Drain Contaminant Water/Deposits in Water Separator
See "Draining Contaminant Water/Deposits in Water Separator" on page
5-76.