Maeda MC405C-3 - 850 kg SEARCHER HOOK INSPECTION AND MAINTENANCE

Section 5 – 850 kg SEARCHER HOOK INSPECTION AND MAINTENANCE Mini-Crawler Crane M A E D A
5-80 1/2019 MC405C-3
850 kg SEARCHER HOOK
INSPECTION AND
MAINTENANCE
Legal Inspection
If a periodic safety inspection is required by the
laws and regulations of your country, perform
that inspection in addition to the inspection items
listed below.
1. Verify that all safety devices are operating
properly.
2. Check the hoist accessories, including the
hook block, for problems or damage.
3. Check the structural parts of the machine,
including the frame and boom, for cracks,
deformation and damage.
4. Check for loose or missing mounting bolts
and joints.
5. Verify that the boom operates properly by
stopping, extending, retracting, raising,
lowering and slewing the boom.
Contact us or a our sales service agency to
request inspection and repair service as needed.
Consumables
Parts for mounting searcher hook are
consumable items. Replace them at periodic
inspection or before they reach abrasion limits.
Replace consumable items regularly, which will
produce economical use of this machine.
Always replace with a Maeda genuine item.
Check parts catalogue for correct part number for
parts request.
List of Consumables
Item
Replacement
cycle
Searcher hook fix bolt
M12x35L strength 10.9
(4pcs)
Every 6 months
or when
damage, crack,
or squash is
found
Searcher hook fix bolt
M12x30L strength 10.9
(4pcs)
Searcher hook fix bolt
M8x16L strength 10.9
(1pcs)
Searcher hook fix nut
M12x1grade (8pcs)
Searcher hook fix washer
M12x3.2t (high tension)
(8pcs)
Items include a halt period. Contact us or a our
sales service agency for part replacement
information.