149
• Drive the machine at as low a speed as possible when
driving down a slope by operating the accelerator pedal
and control levers.
Shifting the control lever into the “NEUTRAL” position
automatically brakes the machine; however, driving down
a slope at high speed may cause the machine to overrun.
• When travelling on a slope, orient the machine so as to be
square to the slope, and operate the machine in a manner
that the operator seat is always located on the higher part
of the slope.
• If the engine stops on a slope, shift the control lever back
into the “NEUTRAL” position, and restart the engine.
To Next Page
Loading...
