50
4.4 PRECAUTIONS FOR TERMINATING CRANE OPERATION
(REMOTE CONTROL SYSTEM)
PRECAUTIONS FOR TERMINATING THE OPERATION BY THE TRANSMITTER
• Before stowing the outriggers, ensure that the boom and fly jib are stowed in the correct
positions.
• Before stowing the outriggers, set the operation mode to the “OUTRIGGER MODE” and
check that the mode is switched correctly.
• When all the operation of the Transmitter is complete, always turn “OFF” the power of the
Transmitter.
• Under no condition will the Transmitter be ON unless the Crane is in operation. Be sure to
keep the power turned “OFF”. Otherwise, unexpected touching or contact of operation levers
or buttons of the Transmitter with any other object may cause undesired motion of the Crane
and a serious accident such as tipping or collision may occur.
To Next Page
Loading...
