16
6. OUTLINE OF REMOTE CONTROLLER
6.1 FEATURE
This device is to be used for the following operation.
This Remote Controller includes both the Transmitter and Receiver which facilitate remote
control of the Crane.
This is a wireless Remote Controller; the Crane can be operated at the most convenient place
away from it within the radio wave range.
6.2 CONFIGURATION
6.2.1 CONFIGURATION OF REMOTE CONTROLLER
This device is composed of the following units and systems:
[1] TRANSMITTER
The transmitter is equipped with left operation lever (1), right operation lever (2) and emergency
stop/remote controller OFF switch (10).
The Transmitter sends signals for crane operations to the Receiver mounted on the main body of
the Machine so that remote operation of the Crane can be carried out.
(1) Left operation lever
(2) Right operation lever
(3) Remote controller power ON/OFF switch
(4) Engine Start/Stop Switch
(5) Operation mode selector switch
(6) Speed/Outrigger selector switch
(7) Load carrying/Fly jib selector switch
(8) Acceleration adjustment switch
(9) Horn switch
(10) Emergency stop/Remote controller OFF
switch
(C1) Cable connection port
(L1) LED light (Front)
(L2) LED light (Control panel)
(N1) Display operation switch
(M1) Left display
(M2) Right display
To Next Page
Loading...
