251
3. LEGAL INSPECTION
If periodic inspection for machine safety assurance is stipulated by laws and regulations
of your country, perform inspection complying with the inspection items listed below.
1. Make sure no abnormal event is present in the safety devices.
2. Check the hoisting accessories including hook block for any abnormalities.
3. Check the winch wire rope end and wire clip for breakage.
4. If wire rope is damaged, replace immediately.
5. Check the hydraulic hose for oil leaks and friction flaws on the surface. Replace the hose if a
surface flaw is detected.
6. Check the structural parts including the boom for cracks and deformations.
7. Check for loose or missing mounting bolts and joints.
8. Check if the booms perform proper operation and stop in extending, retracting, raising,
lowering, and slewing.
If a malfunction is found as a result of inspection, contact us or our sales service agent.
To Next Page
Loading...
