Maeda MC815C - Precautions on Handling Remote Control System

27
2. PRECAUTIONS ON HANDLING REMOTE CONTROL
SYSTEM
DO NOT MODIFY
• Never disassemble or modify the Transmitter, Receiver and
accessories. Otherwise, an electric shock or fire may be
caused.
HOLDING THE TRANSMITTER
• See the illustration on the right for the operation method of
the Transmitter.
Wear the waist belt, and operate the control levers and
buttons with your thumb.
Firmly grasp the grip with other fingers and hold the
Transmitter.
• Always operate the control levers and switches of the
Transmitter with your fingers.
Do not attempt to operate it by any other method such as a
screwdriver etc.
It may make a hole in the Transmitter which allows water to
enter inside the body causing problems or failures which
may lead to a serious hazard.
NO WATER WASHING
• Always clean the Transmitter and keep it unsoiled. Oil or
mud on surface may cause miss-operation with slipping
hands, which may result in a serious hazard.
• Never attempt to high pressure wash or wash with water the
Transmitter and Receiver.
Doing so allows water to enter inside and may cause
problems or failures which could cause an electric shock or
other serious hazard.
• Scrub the Transmitter and Receiver with a damp cloth or
diluted detergent to remove the dirt.
Avoid alkaline or alcoholic cleaners or sprayer cleaners.
Doing so deteriorates plastics and produces cracks.