Maeda MC815C - Moment Limiter Functions; Recovery Operation from Automatic Stop

408
5.2 MOMENT LIMITER FUNCTIONS
CAUTION
When a searcher hook is mounted to the main boom tip and you change it to the searcher hook
mode, the moment limiter and the machine operate as follows.
• The rated total load value shown in the monitor is changed to the value for a searcher hook.
• The main boom angle cannot be 60° or more when Offset Position is -14°.
• When overloaded, the raising operation is prohibited in addition to the general banned
operations.
• The winch operation is prohibited.
5.3 RECOVERY OPERATION FROM AUTOMATIC STOP
Refer to the “OPERATION 1.5.3 [2] RECOVERY OPERATION FROM AUTOMATIC STOP” for more
information about recovery operation.