Maeda MC815C - Inspecting;Refilling of Battery Electrolyte Level

271
[9] INSPECTING/REFILLING OF BATTERY ELECTROLYTE LEVEL
• The battery produces combustible gas and can be explosive. Do not put fire close to
the battery.
• The battery fluid is a hazardous substance. Avoid contact with eyes or skin. Should it
come into contact with eyes or skin, wash the affected area with plenty of water and
consult a physician.
• Do not refill the electrolyte above the “Maximum level line”.
The fluid leakage can cause fire.
CAUTION
• Wipe the top of the battery with a moist cloth to keep it clean.
• Distilled water should be refilled before starting the work next day to avoid freezing.
[Electrolyte level inspection]
1. Place the machine on a level surface.
2. Open the inspection cover (1).
3. Verify the electrolyte you can see through the side of
the battery case from the inspection hole of the
machinery cover.
NOTES
Wipe the battery case clean if it is dirty.
4. Verify that the surface of the electrolyte is at the
maximum level line (1).
5. Close the inspection cover after checking.
[Refilling electrolyte]
If the surface of the electrolyte is not at the maximum level
(1), refill distilled water following the procedure below.
1. Remove the floor mat (5) of the driver’s seat.
2. Remove the mounting bolts (4) (4 bolts) and then
remove the battery cover (3).