223
8.3 AFTER STORAGE
If you did not perform antirust operation monthly during the long-term storage, contact
us or our sales service agency before using the machine.
Perform the following before using the machine after the long-term storage.
• Refuel, grease, and change the oil without fail.
• Remove the battery cover (install the battery if it is removed from the machine), and check the
electrolyte level and specific gravity, and then connect the battery cable at the (+) side first.
• Remove the drain plug of the fuel tank, hydraulic oil tank, and engine oil pan to drain any water
ingress.
• Carefully perform these checks before starting operation and perform warm-up operation.
Carefully check the various parts of the machine.
To Next Page
Loading...
