Maeda MC815C - Handling Monitor and Moment Limiter; Name of Monitor Display; Monitor Display in Searcher Hook Mode

405
5. HANDLING MONITOR AND MOMENT LIMITER
Do not perform any work with the override switch on.
It will result in fall of hoisted load due to overload, breakage of the boom and the bracket, and
crane overturn causing a serious accident resulting in death or serious injury.
CAUTION
In this section, only the equipment with the searcher hook specification, different from the
standard specification is described.
See “Operation
1.5 Moment limiter (overload detector)” for the devices that are not described in
this section.
5.1 NAME OF MONITOR DISPLAY
5.1.1 MONITOR DISPLAY IN SEARCHER HOOK MODE
(1) Load capacity ratio display
(2) Actual load display
(3) Rated total load display
(4) Offset position display
(5) Boom length display
(6) Boom angle display
(7) Working radius display
(8) Lifting height display
(9) Slew angle display
(10) Mode selector switch (Full automatic
stowage)
(11) Setting switch (user mode)
(12)
Rated total load display