Maeda MC815C - Changing Searcher Hook Mode

407
5.1.2 CHANGING SEARCHER HOOK MODE
CAUTION
You can change the searcher hook mode in the user mode.
(1) Changing hook sling number/searcher
hook
(2) Winch settings in searcher hook mode
[1] Changing hook sling number/searcher hook
You can change it by touching the monitor screen to show the
searcher hook.
NOTES
When you select the number of wire falls, it goes back to the
standard crane mode from the searcher hook mode.
[2] Winch settings in searcher hook mode
Winch movement in searcher hook mode can be switched.
• SH Mode Winch ON –
Winch can be controlled in searcher hook mode.
• SH Mode Winch OFF –
Winch cannot be controlled in searcher hook mode.