Maeda MC815C - Every 3000 Hours Maintenance

327
9.13 EVERY 3000 HOURS MAINTENANCE
Perform this maintenance along with maintenance every 50/100/250/500/1000/1500/2000
hours.
[1] INSPECTION OF ECU AND RELATED SENSOR AND ACTUATOR
Inspection of ECU and related sensor and actuator require special tools. Contact us or our sales
service agent to request inspection and repair.
[2] INSPECTION/CLEANING/TESTING OF EGR VALVE
Inspection, cleaning and testing of EGR valve require special tools. Contact us or our sales
service agent to request inspection and repair.
[3] CLEANING OF EGR COOLER (CLEANING OF WATER SIDE/EXHAUST PASSAGE
BLOWER)
Cleaning of EGR cooler (cleaning water side/exhaust passage blower) requires special tools.
Contact us or our sales service agent to request inspection and repair.
[4] INSPECTION OF DPF DOC
Inspection of DPF DOC requires special tools. Contact us or our sales service agent to request
inspection and repair.
[5] INSPECTION OF INLET THROTTLE VALVE OPERATION
Testing of inlet throttle valve requires special tools. Contact us or our sales service agent to
request inspection and repair.
[6] INSPECTION OF EXHAUST THROTTLE VALVE OPERATION
Testing of exhaust throttle valve requires special tools. Contact us or our sales service agent to
request inspection and repair.
[7] INSPECTION AND CLEANING OF INJECTOR
Inspection and cleaning of injector requires special tools. Contact us or our sales service agent
to request inspection and repair.