Maeda MC815C - Adjusting Operator Seat

274
[14] ADJUSTING OPERATOR SEAT
• Adjust the operator seat before operation or when the operator changes.
• Adjust the seat so that the accelerator pedal can be fully stepped in with the operator's
back fitting to the back of operator's seat.
[Adjusting seat back and forth]
1. Set the seat to the appropriate position while
lifting up the slide adjustment lever (1).
2. Release your hand from the lever (1).
NOTES
The fine tuning range by back/forth slide is 160 mm and
can be adjustable.
[Adjusting reclining]
CAUTION
When you recline the back seat, adjust the angle while paying attention to the back
space.
1. Set the back seat to the appropriate angle while pressing forward the reclining adjusting
lever (2).
2. Release your hand from the reclining adjusting lever (1).