Maeda MC815C - Monitor Display in Fly Jib Stowage Mode

376
5.1.2 MONITOR DISPLAY IN FLY JIB STOWAGE MODE
When the fly jib is stowed, the monitor display returns to the normal crane mode.
NOTES
When the fly jib is stowed, the monitor display changes as follows:
• The number of fly jib boom sections is shown as “R”.
• The fly jib length is not shown.
• The fly jib angle is not shown.
• The position of each status indication is adjusted.
• Boom/fly jib operation selector switch changes to the mode selector switch.