Maeda MC815C - Page 253

243
Error
Code
Error Items to check
EO102H
Power start output Lo error • Check harness of power start output circuit
EO102L
Power stop output Lo error • Check harness of power stop output circuit
EO103L
Light output Lo error • Check harness of light output circuit
EO104L
Audio power Lo error • Check harness of audio power circuit
EO105L
Control power Lo error • Check harness of control power circuit
EO13L
Winch brake Hi error
• Check harness of winch brake circuit
EO13H
Winch brake Lo error
EO08L
Winch high speed Hi error
• Check harness of winch high speed circuit
EO08H
Winch high speed Lo error
EOF01H
Fly jib shift SOL Hi error
• Check harness of fly jib shift solenoid
circuit
EOF01L
Fly jib shift SOL Lo error
EO106L
Boom light output Lo error • Check harness of boom light output circuit
EO107L
Fly jib shift relay Lo error • Check harness of fly jib shift relay circuit
EV10
Sensor power Lo error
• Check harness of TTC36X sensor power
circuit
EV11
Rotary lamp power Lo error • Check harness of rotary lamp power circuit
EOF02H
Fly jib derrick / telescopic shift
SOL Hi error
• Check harness of fly jib derrick / telescopic
shift solenoid circuit
EOF02L
Fly jib derrick / telescopic shift
SOL Lo error
EV21
Sensor power Lo error
• Check harness of TTC30X sensor power
circuit
Engine Error
Error
Code
Error Items to check
EE00
Engine error (listed separately)
• For detailed judgment, special tools are
needed. Please contact the dealer.
Other error
Error
Code
Error Items to check
EOR00
OR error
• This code is not an error.
This appears when entering to crane mode
with outriggers not set, so make sure to set
the outrigger on the ground.