Driving modes
6.5 Installing/removing the outrigger beams
Operating manual 3 302 690 en 6 - 47
GMK4100L-1
23.11.2017
6.5.13 Note on error messages with removed outrigger beams
Depending on the outrigger beam, the following error messages can occur
after removal.
The error messages indicate only that the electrical connection between
the outrigger beams and the crane control is disconnected. They have no
further effect on driving.
The error messages are displayed in the driver's cab on the
CCS display
until the outrigger beams are reinstalled.
5801.7.33.2 5809.7.32.96 5801.7.33.98
5803.7.32.2 5807.7.32.96 5803.7.32.98
To Next Page
Loading...
Need help?
General
