Operating elements for driving
3.2 Short description of the operating elements
3 - 58 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
3.2.13 Brakes
Service brake
Display of supply pressure in brake circuits
Parking brake
1 Current supply pressure in brake circuit 1
2 Current supply pressure in brake circuit 2
3Red – supply pressure insufficient
White – supply pressure sufficient
à p. 5 - 60
1 To engage the
parking brake:
Pull the lever down until it locks into place
2 To release the
parking brake:
Lift the lever and push it up until it latches into
place
3 Operating as
auxiliary brake:
Shift the lever to intermediate position
The braking force is increased continuously by
moving the lever from top to bottom.
4 Test position for
towing a trailer:
– Push the lever backwards and downwards until it
locks into place
– Press in the lever and pull it further downwards
The parking brake for the trailer is released;
à p. 5 - 86.
To Next Page
Loading...
