Crane operation
11.6 Settings and displays for crane operation
Operating manual 3 302 690 en 11 - 133
GMK4100L-1
23.11.2017
11.6.10 Displaying the operating hours
You can view the total operating hours for all power units in the Operating
hours
menu. You can also delete the recorded operating hours.
The total operating hours cannot be deleted.
• Open the Operating hours (1) menu.
Displays
The operating hours are recorded as follows:
– The value (1) indicates the total operating
hours, for example, 1,680 hours.
– The value (2) shows the operating hours,
which can be reset.
Exception: The value below the symbol (3)
indicates how often the cycle
Unlock telescopic
section
has been performed, for example,
13,750 times.
The value (4) shows the cycles; this can be
reset.
Reset
The displayed operating hours/cycles (3) can
be reset.
• Select and confirm the symbols (1) one after
the other.
• Confirm the entry with the symbol (2).
You can individually select power units
– display (3) or
– select all – symbol (4).
• Reset the selected operating hours with
button (5) or (6).
To Next Page
Loading...
Need help?
General
