Crane operation
11.7 Working range limiter
Operating manual 3 302 690 en 11 - 137
GMK4100L-1
23.11.2017
In the CCS Start
menu
The RCL shows the limited working range for the slewing angle and working
radius
monitoring systems.
Display examples for switched-on
slewing
angle
and working radius monitoring systems.
11.7.2 Opening the working range limiter menu
•
Open the main menu if necessary and select
the corresponding symbol (1) to (4).
The corresponding
Working range limiter menu
opens.
s
1 Permissible working range according to
the
lifting capacity table – shown darkened
2 Limited working range – shown lightened
To Next Page
Loading...
