Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
Operating manual 3 302 690 en 8 - 33
GMK4100L-1
23.11.2017
8.5.4 Wheel change
•
If a puncture occurs while driving, stop the truck crane, taking the
following traffic into account, and secure the truck crane as outlined in
the applicable legal stipulations of the country in which you are working.
• Select as flat a place as possible to change the wheel.
• Apply the parking brake.
s
G
Risk of accidents due to a wheel falling over
If you temporarily lean a wheel against the truck crane while changing it,
secure it with a rope to prevent it falling over.
Move the outriggers only when no wheel is leaning against the truck crane.
G
Risk of crushing due to turning wheels
When you start the engine, no persons may be within the steering range of
the 3rd and 4th axle lines. These axle lines can be briefly steered during the
start of the engine; sometimes with five seconds delay.
To Next Page
Loading...
Need help?
General
