Manitowoc Grove GMK4100L-1

Crane operation
11.7 Working range limiter
11 - 144 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
11.7.4 Entering limit values manually
When entering the values:
The monitoring must be switched off – symbol (1) is red;
à Switching
monitoring functions on/off
, p. 11 - 146.
Limit values The limit values for the overall height, the working radius, and the slewing
angle are entered in the same way.
– For the overall height
• Select and confirm the symbol (1) – symbol
is red.
• Set the limit value, for example, 17.5 m and
confirm with button (2) or (3). The value is
adopted.
Switch monitoring on;
à p. 11 - 146
– For working radius
• Select and confirm the symbol (1) – symbol
is red.
• Set the limit value, for example, 10.0 m and
confirm with button (2) or (3). The value is
adopted.
Switch monitoring on;
à p. 11 - 146