Crane operation
11.7 Working range limiter
Operating manual 3 302 690 en 11 - 143
GMK4100L-1
23.11.2017
Limiting lifting
• Lift the load to the necessary height.
Select the symbol (1).
• Press the button (6) or (7) once.
The current numerical value (5) is set at
the symbol (2) as the upper limit value,
symbol (1) confirms the entry.
Limiting lowering
• Lower the load to the necessary height.
Select the symbol (4).
• Press the button (6) or (7) once.
• The current numerical value (5) is set at
the symbol (4) as the lower limit value,
symbol (3) confirms the entry.
Switch monitoring on;
à p. 11 - 146
To Next Page
Loading...
