Crane operation
11.1 Before operating the crane
11 - 18 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
Switching on the houselock
• Select the symbol (5).
• Press the button until the symbol (4) is
displayed –
Houselock switched on.
The display first shows the symbol (1), then (2)
and then shows the symbol (4) when the
houselock is switched on.
If the symbol (3) is displayed:
• Let go of the button.
The lock is blocked and you need to correct
the position of the superstructure as
follows.
• Select the symbol (6).
• Press the button until the symbol (1) is
displayed –
Houselock switched off.
• Apply the slewing gear brake.
• Switch on the slewing gear and slew the
superstructure a little further (minimally).
• Switch off the slewing gear.
• Select the symbol (5).
• Press the button until the symbol (4) is
displayed –
Houselock switched on.
• If symbol (3) is still shown, you must again
correct the position of the superstructure.
S
Risk of damage due to slewing with blocked lock
Before slewing ensure that the houselock is switched off. Otherwise the
system will be damaged during slewing.
To Next Page
Loading...
Need help?
General
