Rigging work
12.9 Rigging/unrigging the counterweight
12 - 96 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
Locking You must lock the rear counterweight platform after the counterweight has
been set down for transport.
• Remove the pins (1) from the clamps (2) and
insert them into the connecting points (3).
• Secure the pins.
If the counterweight platform is not correctly
mechanically locked, then a warning will show
in the driver's cab;
à Counterweight, p. 8 - 16.
To Next Page
Loading...
