Rigging work
12.10 Rigging work on the main boom
Operating manual 3 302 690 en 12 - 127
GMK4100L-1
23.11.2017
Depending on the additional equipment, the
truck crane can be equipped with a switchable
air traffic control light.
This air traffic control light (1) has
flashing light
and
constant light lighting modes.
• Select the desired lighting mode using the
switch (2).
Switching on/off
Removing You must remove the rod with the anemometer/air traffic control light
before driving on the road.
• Switch off the air traffic control light.
• Remove the plug and close the sockets (5)
and (4) with the protective caps.
• Wind the cables on to the holders (2).
• Take the rod (1) out of clamp (3).
s
Switch on: Select symbol (1) and confirm – symbol ON is displayed
Switch off: Select symbol (2) and confirm – symbol
OFF is displayed
To Next Page
Loading...
