Symbols/mass unit Description
Value not permissible in legal metrology
(e.g.,10-fold resolution, deactivated load cell).
R1 Range 1
R2 Range 2
R3 Range 3
WP A Weighing point A
Max Maximum load (weighing range)
Min Minimum weight
t, kg, g, mg, lb, oz These weight units are available.
3.4.3.2 Device display
The display of the device permits indication of 6-digit weight values (digit height 18 mm)
with decimal point.
Below the weight display of the device, the currently displayed weight is shown as a bar
graph in relation to the maximum load (Max). When Max reaches 100%, the bar graph is
located on the right.
Weight type/plus or minus sign Description
Gross weight
Gross weight in NTEP or NSC mode
Net weight (Net = gross - tare)
3 Device description Transmitter in eld housing PR 5230
EN-19 Minebea Intec
To Next Page
Loading...
