Minebea Intec PR 5230 - Page 247

Code Event
1031 Digital inputs and outputs were changed.
1032 Limit parameters were changed.
1033 Analog output parameters were changed.
1080 ADC parameters changed after download via HTTP.
1081 Core EEPROM were changed after download via HTTP.
2305 No ADC was detected.
Indicator
Code Event
257 Internal arithmetic error
258 Overload
259 No valid ADC values available.
262 No Sense-Input voltage available.
263 Negative input voltage (wrong polarity) available.
265 Faulty communication with ADC
Powerfail
Only the instrument switch-on is recorded.
Open/save eventlog memory
9.1.3.8 Conguration data
The conguration and calibration data of the EAROMs can be saved for back-up on the
Notebook and downloaded, if necessary.
1. Click on the [Retrieve eventlog memory] menu item in the WEB menu.
A selection window opens.
2. Click on [Open] to open the CSV le.
The CSV le are loaded and opened.
3. Click on [Save]/[Save as] to save the CSV le.
4. Create and open the required directory e.g. on the notebook.
5. Click on [Save] to save the CSV le in the relevant directory.
Click the [Backup of Earom] menu item in the WEB menu.
The backup/restore menu is shown on the display.
Transmitter in eld housing PR 5230 9 Extended functions
Minebea Intec EN-244